This is for all of my fellow makers who want to maker a swedish wall for their kid or friend. Files for this are free because I made one for my son and don't want to make it about money.
Files included - STP models for all pieces - DXF vectors for all pieces
Materials needed
- 18mm Birch Plywood (I used 160x60cm piece)
- Ф25mm wooden rods (I used beech): 11x 620mm long + 5x 536mm long
- M4x35 screws to hold all rods (32 pcs)
- M4x40 screws to hold the sides and the wall plates (8 pcs)
- M5x60 or longer fasteners for mounting the two wall plates that hold the swedish ladder (3 pcs per plate, 6 in total)
Tools used - 8mm Flat Endmill - 3mm Flat Endmill
Skill Level - Beginner
You need to create several toolpaths, in my case I made 4 toolpaths and used 2 router bits. But if you are a complete beginner you can use the DXF file and cut the clock using 6mm flat endmill bit and still come up with almost the same design, only the slides of the walls will be missing as it will be a 2D contour cut.
* Personal use only / commercial license available * No file redistribution
